John Deere – 1023E, 1025R and 1026R – Remove Left Fender and Fuel Tank

Remove the left side fender and fuel tank for access to the left side of the transmission or for repairs to the fuel tank.

[1] – Place engine fuel shutoff valve (A) in closed position.

[2] –
โ†’NOTE:
Fuel tank capacity is 22.2 L (5.6 gal.).

Loosen hose clamp (B) at tank filter. Remove hose and drain fuel to a suitable container.

[3] – Loosen hose clamp (C) and remove fuel return hose from tank fitting.

[4] – Plug fuel hoses to prevent leakage.

[5] – Separate wire harness connector (D) (if installed) and remove from retainers (E).

[6] – Remove shoulder bolt (F) securing fender.

[7] – Remove two bolts (G) and nuts securing fender support bracket to quadrant.

[8] – Remove five bolts (H) and washers securing foot rest.

[9] – Lift outer edge of foot rest (I) and remove fender with fuel tank.