[1] – Lift foot rest outer edge (A) and insert fender flange under foot rest.
[2] – Insert fuel tank support bracket (B) into controls quadrant.
[3] – Align attachment holes in foot rest and fender flange.
[4] –
IMPORTANT:
Front bolt should be installed with assembly off of tractor if possible to ease alignment and prevent possible cross-threading.
Install two hex bolts (C) and nuts securing fuel tank bracket and tighten to specification.
[5] – Install five hex bolts (D) with washers through footrest and tighten to specification.
[6] – Install hex shoulder bolts (E) with washers through footrest and tighten to specification.
[7] – Install fuel hoses to tank and filter fittings (F) and secure with clamps.
[8] – Join wire harness connectors (G), and secure harness with retainers (H).
