1. Shift the range gear shift level to N (Neutral) position on the H (High) speed side. Keeping the lever slightly beingย ย ย ย pushed forward (to the left of the photo), measure the overlapping length “A” of the level and guide.
2. Judgement
[1] CORRECT
Length “A” is 1 to 5 mm (0.04 to 0.1 in.) when the guide and lever are overlapping.
[2] INCORRECT
The overlapping length “A” is less than 1 mm (0.04 in.), or when there is a clearance between the guide and lever. In this case, carry out the following adjustment.
