1. Adjust (shorten) the turnbuckle H (3) so that the overlapping length becomes 1 to 5 mm (0.04 to 0.1 in.).
(Reference)
2. Repeat shifting in a sequence of (H → L → H → R → H) and confirm the shifting is possible.
a) If shifting to the directions of left and right (H→ L and L → H) is possible, the adjustment has been completed.
b) When shifting to the directions of left and right is not possible, this is because the drift “C” in the forward and
backward of the arm H (2) and arm (L – R) (4) in the neutral position has become too large. So make adjustment to the turnbuckle (L – R) (5) to correct the drift.
c) Again, check by shifting and complete the adjustment.
• NOTE
Lock securely the lock screws of adjusted turnbuckle to prevent from becoming loose.
