KUBOTA – L2501 – TRANSMISSION – CHECKING AND ADJUSTING – Adjusting HST Pedal and Stopper Bolt

NOTE
• Stop the engine when adjusting the pedal stroke.
• Be sure to adjust the HST neutral position.
1. Adjust the height (B) and (C) of the pedal stopper bolt (3), (4).
2. Loosen the HST pedal mounting screws (2).
3. Tighten the HST pedal mounting screws (2) so that the clearance (A) between HST pedal and stopper bolt (3)              becomes factory specification at when HST pedal is fully depressed forward.