KUBOTA – L2501 – FRONT AXLE – DISASSEMBLING AND ASSEMBLING – Front Wheel Hub

1. Place the disassembling stand under the transmission case.
2. Remove the tie-rod with the tie-rod end lifter.
3. Remove the front wheel.
4. Remove the front wheel hub cap (1).
5. Draw out the cotter pin.
6. Remove the slotted nut (2).
7. Remove the collar.
8. Remove the front wheel hub (3) with a puller.
(When reassembling)
• Replace cotter pin with a new one.
• Apply grease to the oil seal in the front wheel hub.