KUBOTA – L2501 – FRONT AXLE – DISASSEMBLING AND ASSEMBLING – Knuckle Shaft

1. Remove the knuckle arm (1) and draw out the knuckle shaft (4) from the front axle.
(When reassembling)
• Insert the thrust ball bearing (2) and oil seal (3), noting its direction.
• Apply grease to the oil seals (3), (6).
• Do not interchange right and left knuckle arms.
• When lift the knuckle shaft, the knuckle arms must be mounted so that the clearance between the knuckle arms           and front axle is 0.30 to 1.0 mm (0.012 to 0.039 in.).